Telescopic conveyor consists of frame, driving drum, driven drum, pulling out device, angle changing device, transporter belt and drives of all components.
The conveyor frame is made from steel section and covered with enamel.
The conveyor is moveable and based on the wheels.
The driving drum is fixed on the frame. Bearing assembly is placed in supports. There are closed bearings in the bearing assembly. Grease in bearings provides the bearings serviceability for all working period. Gear-motor made by STM company drives the drive drum. The gear-motor is placed directly on drive drum shaft and fixed through the shackle.
The driven drum is fixed on the frame with bearing supports that can tension and adjust the transporter belt. There are closed bearings in the bearing assembly of the driven drum also. Grease in bearings provides the bearings serviceability for all working period. The belt motion adjustments are carried out by screw tension devices of drive, driven and roll blocks and by the front rod.